Nickel plating

The best solution for a trouble-free and continuous operation of a satin nickel bath.

Parts galvanized in a satin nickel bath have a particularly high-quality appearance. However, in continuous operation, satin nickel requires a lot of personnel effort and constant optimization.

Our system enables consistent quality with a low reject rate. With our permanent glare-free nickel unit (PBNA), we have developed a user-friendly system that reduces the reject rate due to operating errors and device failures and reduces chemical consumption.

Our equipment is second to none.

PBNA | 3RD GEN

A glare-free / satin nickel bath has high demands on the filter equipment.

The third generation was additionally equipped with automatic valves. This enables the operator to be “guided” and automatically carry out all manual work on the filter system such as rinsing, emptying, pre-coating with filter aid and activated carbon powder. Operating errors are thus almost impossible.

The control system automatically sets the valves for each operating mode. The PLC is password-protected so that the plant remains accessible only to authorized employees and it can be traced at any time who did what and when. A package of data records is stored permanently and provides information about flow rate, speed, pressure in the filter housings, dosing quantities and valve positions even at a later date. This data can then be evaluated accordingly and used for quality control.

AUTOMATION
VERY HIGH

NUMBER OF FUNCTIONS
VERY HIGH

PBNA | 2ND GEN

The second generation is equipped with a PLC. It makes it possible to store and recall different additional concentrations that produce different so-called colour tones.

The addition of the emulsion after the basic cleaning of the bath can thus be done automatically, as well as the change to another colour tone, which is achieved by a higher concentration of the emulsion.

AUTOMATION
HIGH

NUMBER OF FUNCTIONS
HIGH

PBNA | 1ST GEN

A glare-free / satin nickel bath has high demands on the filter equipment.

With this first generation, the flow rate can be set on a display and the basic setting of the dosing pump must be carried out manually once.

Our unit offers the following advantages:
• Only one unit for main and maintenance filtration.
• Presetting of the flow rate on the display.
• No manual adjustment by FU or valves.
• Precise dosing in linear dependence of the flow rate.
• No continuous adjustment of the dosing.
• Consistent settings give reproducible results.

NICKEL PLATING